• Designed for light duty in the automotive industry, monument
    renovation, removing graffiti, cleaning elevations of small buildings.
    It is ready to work in any weather conditions. Suitable for on-site work
    as well as off site.

  • The blaster needs connecting to you own, external air compressor.

  • It works with baking soda and other abrasives (glass, corundum, sand,
    etc.) From the smallest granule size to the biggest one of 2-3mm.

SPECIFICATIONS

  • SB-150 SodaBlast™ blaster pot

  • Manual screwing inlet

  • Air pressure regulator

  • Abrasive amount regulator

  • Electric, remote control with a wire

  • Clean air connection for tools

  • Timer (sec./min./hrs)

  • 340o rotating outlet of the stream hose

  • Blaster cooling system:

  • – MT-2 water separator

  • – CF-75 cyclonic air filter

  • Pressure cooler 10bar

  • High-speed fan SPAL

  • Stream hose 15 metres long, with a diameter of 20mm, water hose 15m

  • Universal round nozzle size #4

  • Blaster design: carbon steel and brass. Textured palette

Technology
Work done 3x faster per 1 hour (3x faster abrasive ejection speed – 965km/h) than a sandblaster. Patented construction. Ensures a continuous, undisturbed stream of abrasive thanks to a special air flow through the whole pot of a blaster.

Efficiency
up to 15 m2/h

Abrasive consumption
about 5 – 15kg/h

Pot volume
up to 1.5 bags x 25kg each = 37.5kg of abrasive

Work modes:
1. Dry, abrasive with no water
2. Hydrodynamic: with water areola powered from a water tap into a blaster nozzle
3. In a water mix: dry abrasive poured with water in a container within a 1:1 ratio

Nozzle sizes
Round nozzles available in sizes from #3 to #4, as well as flat nozzles.
Sinters used in nozzles are abrasion-resistant ensuring up to 1,500 hours of work

Required air compressor
3,5m3/min or more. Pressure 7 bar, max 10

Optional sources of water
1. Water (in a hydrodynamic mode) – from an urban network or a gravitational tank. Garden hose extension. Water consumption: about 0,5-1 litre/min.
2. In a water mix – water is poured manually into the blaster pot

Longer hoses
Hoses can be extended up to 200m. Optimal hose extension: 50-100m
Depend from air compressor efficiency

Machine operation
Min. 1 person, optimally 2 persons

Place of work
Stationary at work shop or inside the car to work away

Dimensions
609mm x 1079mm x 1435mm Height

Weight
176 kgs

Blaster of medium efficiency

  • Designed for construction works. Cleaning efficiency higher than that of the SB-150 model. The cooling system is the same as in the SB-500 model. Ready to work in any weather conditions. Suitable for work on-site and off-site.

  • The blaster needs connecting to your own, external air compressor.

  • It works with baking soda and other abrasives (glass, corundum, sand, etc.) From the smallest granule size to the biggest one of 2-3mm.

  • A medium-sized pot, continuous stream, high efficiency.

SPECIFICATIONS

SB-200 Mobile” machine
  • SB-200 SodaBlast™ blaster pot
  • 1-second self-sealing inlet
  • Air pressure regulator
  • Abrasive amount regulator
  • Electric, remote control with a wire
  • Clean air connection for tools
  • Timer (sec./min./hrs)
  • 340o rotating outlet of the stream hose
  • Blaster cooling system:
  • – MT-3 water separator
  • – CF-125 cyclonic air filter
  • Pressure cooler 10bar
  • High-speed fan SPAL
  • Stream hose 15 metres long, with a diameter of 20mm, water hose 15m
  • Universal round nozzle size #5
  • Blaster design: carbon steel and brass. Textured palette

Technology

Work done 3x faster per 1 hour (3x faster abrasive ejection speed – 965km/h) than a sandblaster. Patented construction. Ensures a continuous, undisturbed stream of abrasive thanks to a special air flow through the whole pot of a blaster.

Efficiency
up to 20 m2/h

Abrasive consumption
about 5 – 20kg/h

Pot volume
up to 2 bags x 25kg each = 50kg of abrasive

Work modes:
1. Dry, abrasive with no water
2. Hydrodynamic: with water areola powered from a water tap into a blaster nozzle
3. In a water mix: dry abrasive poured with water in a container within a 1:1 ratio

Nozzle sizes
Round nozzles available in sizes from #3 to #5, as well as flat nozzles.
Sinters used in nozzles are abrasion-resistant ensuring up to 1,500 hours of work

Required air compressor
4,5m3/min or more. Pressure 7 bar, max 10

Optional sources of water
1. Water (in a hydrodynamic mode) – from an urban network or a gravitational tank. Garden hose extension. Water consumption: about 0,5-1 litre/min.
2. In a water mix – water is poured manually into the blaster pot

Longer hoses
Hoses can be extended up to 200m. Optimal hose extension: 50-100m
Depend from air compressor efficiency

Machine operation
Min. 1 person, optimally 2 persons

Place of work
Stationary at work shop or inside the car to work away

Dimensions
1168mm x 1524mm x 1524mm Height

Weight
338 kgs

Top blaster of the highest efficiency

  • A blaster designed for industrial and construction works that require maximum efficiency. Ready to work in any weather conditions. Suitable for work on site and away.

  • Blaster needs connecting to your own, external air compressor.

  • It works with baking soda and other abrasives (glass, corundum, sand, etc.) From the smallest granule size up to the biggest one of 2-3mm.

SPECIFICATIONS

SB-500 Mobile” machine
  • SB-500 SodaBlast™ blaster pot
  • 1-second self-sealing inlet
  • Air pressure regulator
  • Abrasive amount regulator
  • Electric, remote control with a wire
  • Clean air connection for tools
  • Timer (sec./min./hrs)
  • 340o rotating outlet of the stream hose
  • Blaster cooling system:
  • – MT-3 water separator
  • – CF-125 cyclonic air filter
  • Pressure cooler 10bar
  • High-speed fan SPAL
  • Stream hose 15 metres long, with a diameter of 25mm, water hose 15m
  • Universal round nozzle size #5
  • Blaster design: carbon steel and brass. Textured palette

Technology

Work done 3x faster per 1 hour (3x faster abrasive ejection speed – 965km/h) than a sandblaster. Patented construction. Ensures a continuous, undisturbed stream of abrasive thanks to a special air flow through the whole pot of a blaster.

Efficiency
up to 20 m2/h

Abrasive consumption
about 5 – 40kg/h

Pot volume
up to 6 bags x 25kg each = 150kg of abrasive

Work modes:
1. Dry, abrasive with no water
2. Hydrodynamic: with water areola powered from a water tap into a blaster nozzle
3. In a water mix: dry abrasive poured with water in a container within a 1:1 ratio

Nozzle sizes
Round nozzles available in sizes from #3 to #8, as well as flat nozzles.
Sinters used in nozzles are abrasion-resistant ensuring up to 1,500 hours of work

Required air compressor
5m3/min or more. Pressure 7 bar, max 10

Optional sources of water
1. Water (in a hydrodynamic mode) – from an urban network or a gravitational tank. Garden hose extension. Water consumption: about 0,5-1 litre/min.
2. In a water mix – water is poured manually into the blaster pot

Longer hoses
Hoses can be extended up to 200m. Optimal hose extension: 50-100m
Depend from air compressor efficiency

Machine operation
Min. 1 person, optimally 2 persons

Place of work
Stationary at work shop or inside the car to work away

Dimensions
1168mm x 1524mm x 1651mm Height

Weight
369 kgs